Linear DC Actuator
1.This Linear DC Actuator is equipped with the sliding drive motor. It moves by its white slider. So The actuator block allows a big stroke range in confined spaces.
2.You need to decide what stroke,load capacity and speed of the actuator you need. The stroke is the length the actuator moves through. So as an example a 12" Stroke actuator will move 12", but note that the total length of the actuator is about 20".
3.The actuator voltage is 12v or 24v . So if the customer has no requirement about the voltage, we understand an provide 24v DC. SO if you need 12v,please indicate this in your enquiry.
4.If you also need the control parts( power supply, adaptor, handset), also indicate it in your enquiry.
*24V DC permanent magnet motor
*Thrust up to 6000N
*Elegant and compact design with small installation dimensions
*Built-in limit switches (not adjustable)
*Standard protection class: IP20
*Noise level 48db: actuator not loaded
*Duty cycle: Max10% or 2 minutes continuous use followed 18 minutes not in use
*Ambient temperature:-5℃ to +40℃
*Standard stroke:200-400 mm, can design as customer's requirement
*Free load speed:7-50mm/s
*Rated load speed: 5-40mm/s
TV lift system