oukin@dc-linear-actuators.com +86-575-82036288
Electric Linear Actuators

Electric Linear Actuators


Product introduction:

This Electric Linear Actuator consists of a drive motor, reduction gear, screw, nut, guide sleeve, push rod, slider, spring, housing and turbine, micro-control switch and so on. It enables remote control and centralized control. It can travel within a certain range of travel. Typical trips are 100, 150, 200, 250, 300, 350 or 400 mm.

Product features:

1. The Electric Linear Actuator is also equipped with overcurrent circuit protection. This protects the actuator at the end of the actuator stroke or when it is overloaded, because it automatically stops when an overcurrent is detected. Our actuators are used in a wide range of industries and markets, from home to hospital, machinery and construction, from blinds to cabinets and electric sofas, from electric wheelchairs to medical bed equipment, from production automation to vehicles and lifting platforms.

2. This Electric Linear Actuator is equipped with a planetary gear box that is consistent with the pipe body. This design makes this actuator suitable for applications where installation space is limited and limited. Its high IP rating protects the actuator from water and dust, so they can be used in very harsh environments.


*24V DC permanent magnet motor

*Thrust up to 6000N

*Elegant and compact design with small installation dimensions

*Built-in limit switches (not adjustable)

*Standard protection class: IP20

*Noise level 48db: actuator not loaded

*Duty cycle: Max 10% or 2 minutes continuous use followed 18 minutes not in use

*Ambient temperature:-5℃ to +40℃


*Standard stroke:200-400 mm, can design as customer's requirement

*Free load speed:7-50mm/s

*Rated load speed: 5-40mm/s

Product show:

OK618 with wired handset.jpg

Send Inquiry