Home > knowledge > Content

Common sense when installing a TV stand or stand

In order to let everyone install the flat-panel TV, whether it is with a base or a rack, it can be perfect. Then the installation master of the TV Lifts will introduce some points for you, and you need to pay attention to common sense during the installation process. I hope everyone Do not miss.

1, the placement position is very important (base)

      In general flat-panel TVs, the heat-dissipating grid is usually designed on the back or side back, so a ventilated space is required on the back of the TV and on the upper, lower, left and right sides. For a flat-panel TV placed in a seat, if it is placed on a low cabinet, the back of the fuselage must be more than 15 cm away from the wall, and it is better to keep a distance of 20 cm or more between the TV and other furniture. First, for the sake of ventilation and ventilation, it is convenient to operate when wiring is convenient.

2, the distance between the TV and the wall is too close to affect the heat (rack)

     Many home users like to put flat-panel TVs on the wall, which can save space on the floor and do not need to use a low cabinet to support the TV. But don't think that wall hanging is to completely fit the TV to the wall.

     In fact, the wall-mounted TV still has to be about 15 cm away from the wall.

     First of all, since the various interfaces of the TV are basically arranged on the back side, various data lines cannot be bent too much against the wall surface, otherwise it is easily broken.

     Secondly, it is still the problem of ventilation and heat dissipation of the TV. If the back of the body is too close to the wall, it is easy to accumulate hot air around the fuselage and it is not easy to circulate.

3, the distance of viewing distance can not be ignored (base pylon)

     The size of the TV screen affects the distance of the viewing distance to some extent. For example, the living room has about 25 square meters of users, the distance between the TV and the sofa is about 4 meters, and the 37-42 inch TV is more in line with people's viewing habits. At this time, the visual and wide-scale visual advantages of the TV can best be reflected. Out of effect. The price of flat-panel TVs of this size is currently matched by the economic ability of users who have the ability to live in a living room with an area of about 25 square feet. However, if the TV screen is less than 32 inches at this time, it will be a bit difficult, the screen width is not enough, the font is too small, the TV volume should be opened even more, and the time is long, even if your eyesight is above 5 or 0, look It will also feel dry and tired.

4, how to deal with the cable connection of the wall TV

     Leave space for the interface and choose a well-designed original pylon. To arrange the troubled connection, you can add some baffles or three-dimensional fasteners on the side of the TV wall to make the connection pass from the back. Choose a reasonable interface layout: When choosing a TV, the layout of the interface is also an important factor when you consider the model. The most reasonable design should be on the left and right sides or the lower interface, and most of the interfaces are designed. The best way is to equip each interface with an extension cable so that the connection to the wall can be fixed. After replacing the signal source, you only need to connect it elsewhere.

5, how to place a flat-panel TV is the most reasonable

     If the TV is to be placed on the TV cabinet, the height of the TV should be considered. It should be that when the person sits down, the head is slightly low, and the line of sight is a little downward. This way, the TV can avoid the feeling of being tired because of watching TV for a long time.

     In addition, the direction of the TV set is good. After the person sits, the center of the vision falls on the center of the screen of the TV. The visual effect is the best and the visual fatigue can be reduced.

tv-lift-console46168590679